CH-HPC2DW Hybrid Programmable Dual Camera

The Chipatronic CH-HPC2DW programmable high resolution, dual caravan camera with AHD or CVBS signal and PAL or NTSC TV format is one of the most advanced vehicle cameras available in Australia and was designed and is assembled by the supplier in Australia.
This comprises two cameras in a common bracket with completely free adjustment of either camera up or down to suit each individual installation and driver and differs totally from most other dual cameras which have large, stepped adjustment requiring disassembly of the camera to change.

One camera has a narrow angle lens and is used for rear vision while driving and this shows less of what is immediately behind the van and more of what is further back.
The other camera is a standard, wider angle device and is used for reversing and shows the area directly behind the van and as such will be tilted downwards.

These cameras can work with the latest, high-resolution AHD monitors for superior image quality or can be re-programmed to suit standard Composite Video (CVBS) systems including older monitors or in-dash displays.

AHD supplies better quality video than traditional composite but requires a compatible display and depending on your requirements, this may not always be possible as most in-dash displays do not have this capability as yet. To change the CH-HPC2DB to composite mode requires a programming change which must be done before shipping and at the same time the TV format should also be set to either PAL or NTSC. If you are unsure we recommend using NTSC as this is what most in-dash systems would use.

If you have existing vehicle cameras connected to the same display and are not sure of the format, you should consult with a professional before proceeding.

This is a bracket mounted camera so can be fixed on most flat surfaces and adjusted to to suit the view required but stands off the surface. If this is not suitable, alternative surface mount cameras are also available.

In both cases the quality of vision will be best when used in AHD mode with a compatible monitor and the CH-STDAHD5 or CH-RVMAHD73H are recommended for use with these cameras.

Standard extension cables should be used to connect to the monitor or for caravans please use the caravan cables shown below.